# model: RB760iGS # serial-number: D4500DF5FE91 # firmware-type: mt7621L # current-firmware: 6.48 # installed-version: 7.12.1 # # 2024-10-02 08:30:03 by RouterOS 7.12.1 # software id = MVRP-6WQZ # # model = RB760iGS # serial number = D4500DF5FE91 /interface bridge add name=loopback /interface ethernet set [ find default-name=ether2 ] comment=REDE-INTERNA set [ find default-name=ether5 ] comment=VIA-LIVE set [ find default-name=sfp1 ] comment=LINK /interface vlan add interface=sfp1 name=VLAN-205-CTW vlan-id=205 add interface=ether5 name=VLAN-1140-LIVE vlan-id=1140 /interface pppoe-client add add-default-route=yes allow=pap,chap interface=sfp1 name=construwinssde password=csde102030 use-peer-dns=yes user=construwinssde /interface vlan add interface=VLAN-1140-LIVE name=VLAN-206-CTW-LIVE vlan-id=206 /interface list add name=N_CONFIAVEIS /interface lte apn set [ find default=yes ] ip-type=ipv4 use-network-apn=no /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik /port set 0 name=serial0 /queue simple add max-limit=250M/250M name=CONSTROWINS target=143.0.253.108/32,2804:2994:c006::/48 /queue type set 0 kind=sfq set 9 kind=sfq /routing bgp template set default disabled=no output.network=bgp-networks /routing ospf instance add disabled=no name=default-v2 out-filter-chain=ospf-out redistribute=connected router-id=10.255.255.108 add disabled=no name=default-v3 redistribute=static router-id=10.255.255.108 version=3 /routing ospf area add disabled=no instance=default-v2 name=backbone-v2 add disabled=no instance=default-v3 name=backbone-v3 /snmp community set [ find default=yes ] disabled=yes add addresses=143.0.252.0/22 name=SnmP_Se77E /ip neighbor discovery-settings set discover-interface-list=!dynamic /ipv6 settings set max-neighbor-entries=8192 /interface l2tp-server server set default-profile=default ipsec-secret=12345678 use-ipsec=required /interface list member add interface=ether2 list=N_CONFIAVEIS /interface ovpn-server server set auth=sha1,md5 /interface pppoe-server server add authentication=pap,chap interface= service-name=service1 /ip address add address=10.0.8.170/30 interface=VLAN-206-CTW-LIVE network=10.0.8.168 add address=10.0.8.166/30 interface=VLAN-205-CTW network=10.0.8.164 add address=10.10.20.4 comment=REDE-INTERNA interface=ether2 network=143.0.253.108 add address=10.255.255.108 interface=loopback network=10.255.255.108 /ip firewall raw add action=notrack chain=prerouting add action=notrack chain=output /ip route add disabled=no distance=250 dst-address=0.0.0.0/0 gateway=10.0.8.166 /ipv6 route add disabled=no distance=1 dst-address=2804:2994:c006::/48 gateway=fc00:0:80::2a routing-table=main scope=30 suppress-hw-offload=no target-scope=10 /ip service set telnet address=143.0.252.0/22 disabled=yes port=2377 set ftp disabled=yes set www address=205.164.78.0/23,143.0.252.0/22 disabled=yes port=8888 set ssh address=205.164.78.0/23,143.0.252.0/22,143.0.252.58/32 port=2277 set api disabled=yes set winbox address=143.0.252.0/22,205.164.78.0/23 set api-ssl disabled=yes /ipv6 address add address=fc00:0:80::29/125 advertise=no interface=ether2 /ipv6 nd set [ find default=yes ] other-configuration=yes /ppp profile set *0 remote-address=*1 /ppp secret add disabled=yes name=teste password=teste service=l2tp /radius add address=10.7.7.106 secret=77acesso service=login src-address=143.0.255.6 /radius incoming set accept=yes port=3779 /routing bfd configuration add disabled=no interfaces=all min-rx=200ms min-tx=200ms multiplier=5 /routing filter rule add chain=ospf-out disabled=no rule="if (dst == 10.0.8.164/30) { accept; }\r\nif (dst in 10.0.8.168/30) {accept}\r\nif (dst in 143.0.252.0/22) {accept}\r\nif (dst in 10.255.255.108) {accept}" add chain=ospf-in disabled=no rule="if (dst==0.0.0.0/0) { accept }" /routing ospf interface-template add area=backbone-v2 auth-id=1 auth-key="" cost=10 disabled=no interfaces=VLAN-205-CTW networks=10.0.8.164/30 priority=1 type=ptp use-bfd=no add area=backbone-v3 cost=10 disabled=no interfaces=VLAN-205-CTW priority=1 type=ptp use-bfd=no add area=backbone-v3 cost=20 disabled=no interfaces=VLAN-206-CTW-LIVE priority=1 type=ptp use-bfd=no add area=backbone-v2 cost=20 disabled=no interfaces=VLAN-206-CTW-LIVE networks=10.0.8.168/30 priority=1 type=ptp use-bfd=no add area=backbone-v3 disabled=no interfaces=loopback passive /snmp set contact=se77e enabled=yes location=0.0.0.0/0 trap-community=SnmP_Se77E trap-version=2 /system clock set time-zone-name=America/Sao_Paulo /system identity set name=SETTE-CTW /system logging add disabled=yes topics=snmp /system note set show-at-login=no /system ntp client set enabled=yes /system ntp server set manycast=yes /system ntp client servers add address=10.7.7.103 /system package update set channel=testing /system watchdog set automatic-supout=no watchdog-timer=no /tool graphing interface add /tool romon set enabled=yes secrets=sette@2023 /user aaa set use-radius=yes