# model: RB4011iGS+ # serial-number: HD9081D115M # firmware-type: al2 # current-firmware: 7.13.2 # installed-version: 7.13.2 # # 2024-09-28 04:28:33 by RouterOS 7.13.2 # software id = I4U7-KWU2 # # model = RB4011iGS+ # serial number = HD9081D115M /interface ethernet set [ find default-name=ether1 ] comment=LINK set [ find default-name=ether5 ] comment=REDE-INTERNA /interface vlan add interface=ether1 name=VLAN-219-NMG vlan-id=219 /interface list add name=N-CONFIAVEIS /interface lte apn set [ find default=yes ] ip-type=ipv4 use-network-apn=no /port set 0 name=serial0 set 1 name=serial1 /routing ospf instance add disabled=no name=ospf-instance-1 router-id=10.0.8.246 /routing ospf area add disabled=no instance=ospf-instance-1 name=ospf-area-1 /snmp community set [ find default=yes ] addresses=143.0.252.0/22 name=SnmP_Se77E /ip firewall connection tracking set enabled=no /ip neighbor discovery-settings set discover-interface-list=!N-CONFIAVEIS /ip settings set max-neighbor-entries=8192 /ipv6 settings set disable-ipv6=yes max-neighbor-entries=8192 /interface list member add interface=ether5 list=N-CONFIAVEIS /interface ovpn-server server set auth=sha1,md5 /ip address add address=10.0.8.246/30 comment=VLAN-219-NMG interface=VLAN-219-NMG network=10.0.8.244 add address=143.0.254.169/30 comment=REDE-INTERNA interface=ether5 network=143.0.254.168 /ip route add disabled=no distance=250 dst-address=0.0.0.0/0 gateway=10.0.8.245 pref-src="" routing-table=main scope=30 suppress-hw-offload=no target-scope=10 /ip service set telnet disabled=yes set ftp disabled=yes set www disabled=yes set ssh address=205.164.78.0/23,143.0.252.0/22,143.0.252.58/32 port=2277 set api disabled=yes set winbox address=143.0.252.0/22 set api-ssl disabled=yes /routing bfd configuration add disabled=no interfaces=all min-rx=200ms min-tx=200ms multiplier=5 /routing ospf interface-template add area=ospf-area-1 disabled=no interfaces=VLAN-219-NMG networks=10.0.8.244/30 type=nbma add area=ospf-area-1 disabled=no interfaces=ether5 networks=143.0.254.168/30 /snmp set enabled=yes /system clock set time-zone-name=America/Sao_Paulo /system identity set name=SE77E-NMG /system note set show-at-login=no /system ntp client set enabled=yes /system ntp client servers add address=10.7.7.103 /system resource irq rps set sfp-sfpplus1 disabled=no /system watchdog set automatic-supout=no watchdog-timer=no