#              model: RB760iGS
#      serial-number: A36A0C6EF9A0
#      firmware-type: mt7621L
#   current-firmware: 6.47.1
#   installed-version: 7.11.2
# 
# 2024-10-04 17:30:45 by RouterOS 7.11.2
# software id = EYTP-RYHH
#
# model = RB760iGS
# serial number = A36A0C6EF9A0
/interface ethernet
set [ find default-name=ether1 ] comment=CLIENTE
set [ find default-name=sfp1 ] comment=LINK
/interface vlan
add interface=sfp1 name=VLAN-200-GVP vlan-id=200
/interface lte apn
set [ find default=yes ] ip-type=ipv4 use-network-apn=no
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=dhcp_pool2 ranges=143.0.254.142
/ip dhcp-server
add address-pool=dhcp_pool2 interface=ether1 lease-time=1d name=dhcp1
/port
set 0 name=serial0
/queue simple
add max-limit=560M/560M name=QUEUE-GVP-GOI target=143.0.254.142/32
/routing ospf instance
add disabled=no in-filter-chain=ospf-in name=default-v2
add disabled=no in-filter-chain=ospf-in name=default-v3 version=3
/routing ospf area
add disabled=no instance=default-v2 name=backbone-v2
add disabled=yes instance=default-v3 name=backbone-v3
/snmp community
set [ find default=yes ] addresses=143.0.252.0/22 name=SnmP_Se77E
/ip firewall connection tracking
set enabled=no
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/ipv6 settings
set max-neighbor-entries=8192
/interface ovpn-server server
set auth=sha1,md5
/ip address
add address=143.0.254.141/30 interface=ether1 network=143.0.254.140
add address=10.0.8.66/30 interface=VLAN-200-GVP network=10.0.8.64
/ip dhcp-server network
add address=143.0.254.140/30 gateway=143.0.254.141
/ip dns
set servers=143.0.252.10,143.0.252.30,2804:2994:77::10,2804:2994:77::30
/ip route
add disabled=no dst-address=0.0.0.0/0 gateway=10.0.8.65
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www disabled=yes
set ssh address=205.164.78.0/23,143.0.252.0/22,143.0.252.58/32 port=2277
set api disabled=yes
set winbox address=143.0.252.0/22,205.164.78.0/23
set api-ssl disabled=yes
/ip ssh
set allow-none-crypto=yes forwarding-enabled=remote
/radius
add address=10.7.7.106 secret=77acesso service=login src-address=10.0.8.66
/routing bfd configuration
add disabled=no interfaces=all min-rx=200ms min-tx=200ms multiplier=5
/routing filter rule
add chain=ospf-in disabled=no rule="if (dst-len in 0-32) { reject; }"
/routing ospf interface-template
add area=backbone-v2 disabled=no interfaces=ether1 networks=143.0.254.140/30 priority=1
add area=backbone-v2 auth-id=1 auth-key="" cost=10 disabled=no interfaces=VLAN-200-GVP networks=10.0.8.64/30 priority=1 type=ptp use-bfd=no
/snmp
set enabled=yes
/system clock
set time-zone-name=America/Sao_Paulo
/system identity
set name=SE77E-GVP-GOI
/system note
set show-at-login=no
/system ntp client
set enabled=yes
/system ntp server
set manycast=yes
/system ntp client servers
add address=10.7.7.103
/tool romon
set enabled=yes secrets=@a7net@#
/user aaa
set use-radius=yes